Category Archive: Uncategorized

Schenke Tool Adds to its CNC Machining & Vertical Milling Services

We have added a new Okuma Genos M560-V Vertical Machining Center to keep up with increasing demand for CNC Vertical Milling.

This vertical machine’s highly rigid, thermally stable construction causes no thermal deformation, resulting in reduced thermal growth, high accuracy and improved machining performance.

Additional features are:

  • 1000 psi thru-spindle coolant (resulting in faster machining)
  • Renishaw OMP400 high accuracy probe (resulting in faster setups and superior part accuracy)
  • Table travel of 41” (X) x 22” (Y) x 18” (Z) (resulting in increased capacity)
  • Tsudakoma 4th axis rotary indexer (resulting in increased capability.

It handles a variety of materials, from titanium to aluminum, providing high quality, cost effective parts.

Schenke Tool Add New Haas CNC Drill/Mill Center for Increased CNC Machining Capacity

Schenke Tool, located in Paradise, PA is constantly adding to our facility to keep up with increasing demand and for continuous improvement. We recently added our new Haas DM-2 CNC Machining Center, allowing us to make parts faster and resulting in reduced costs for our customers. The DM-2 is a compact, high-speed machining center built with proven Haas components and sub-assemblies. The high spindle speed is 15,000 rpm, fast feed rates (1200 rpm) & rapid speeds (2400 rpm) are more than twice that of any other machine in our shop. Tool changes in under a second give us an efficient machine to better service our customers.

For more information you can see this machine in action:

High Speed Machining Steel

precise-machining-high-quality

About Us:

A unique advantage for our customers is that Schenke Tool offers in-house tooling and fixturing, keeping your parts in one location. We offer full job shop capabilities including cnc milling & turning, waterjet cutting on our two 3-axis cutting systems, Automated Robotic Welding, short run stampings and mig & tig welding services.

Schenke Tool has been servicing Industry for over 60 years. Our customers have relied on our extensive knowledge, precise machining and high quality control as we have led the way in part manufacturing and tooling. For more information, please visit our website www.schenketool.com or call 1- 888-522-7086.

 

Schenke Tool Adds New CNC Machining Capabilities

Schenke Tool Adds New CNC Machining Capabilities

Schenke Tool Company, located in Paradise, PA, has increased its CNC Capacity by installing the Haas ST-20SSY including CNC Turning and Milling operations in one machine. The Haas Y-axis lathes provide the ability to turn and mill complex parts and perform multiple operations on a single machine – increasing throughput, reducing handling, and improving part accuracy.

Schenke Tool Adds their Second Robotic Welder to Increase Welding Capabilities

Schenke Tool Adds their Second Robotic Welder to Increase Welding Capabilities

The Yaskawa Motoman ArcWorld Robotic welder enhances Schenke Tool Company’s already extensive facility – by adding a second robotic welder; we can improve turn-around times for our customers. This machine is especially good for small to medium-sized parts produced at medium to high volumes.

Schenke Tool Company Adds New High-Speed Machining Center for Increased Machining Capacity

Schenke Tool Company Adds New High-Speed Machining Center for Increased Machining Capacity

Schenke Tool Company, located in Paradise, Pa, is continually updating its capabilities to better service our customers. Our most recent addition to our shop is the Haas VF-2SS CNC High-Speed Machining Center. The Super-Speed Vertical Machining Center has a heavy-duty yet compact design and is made in the USA. This powerful tool reduces cycle times with improved accuracy and has an ultra-fast side-mount tool changer and high-speed rapids on all axes.

Schenke Tool Adds New AC/DC Inverter TIG Welder to Add to Our Welding Capabilities

Schenke Tool Adds New AC/DC Inverter TIG Welder to Add to Our Welding Capabilities

Schenke Tool Company adds a new state-of-the-art AC/DC Inverter TIG Welder in addition to our conventional MIG and Robotic welding capabilities. We can weld very precise, smooth welds on steel, stainless steel and aluminum. The welds produced are clean, eliminating time-consuming and costly clean up. Since the heat is narrowly focused on the welded area, we can offer a greatly reduced area of distortion over conventional TIG welding.

Schenke Tool Adds New Abrasive WaterJet Cutting Machine, Featuring Taper Compensating Cutting Head, to add to its Machining Capabilities

Schenke Tool Adds New Abrasive WaterJet Cutting Machine, Featuring Taper Compensating Cutting Head, to add to its Machining Capabilities

Schenke Tool Company in Paradise, Pa adds a second abrasive waterjet machine to its operations. The OMAX Model 55100 features precision machining from prototype to production runs in sizes up to 55″ x 100″. The Model 55100 JetMachining Center cuts complex flat parts out of materials including stainless steel, aluminum, copper, brass, high-temperature alloys, plastic, glass, and composites directly from a CAD drawing or .DXF file. JetMachining is ideal for short-run part production….